Roof Shingle Belting, Roofing Conveyor Belts

Roof Shingle Belt, Roofing Belts

Truck mounted roofing conveyors require several chevron patterns designed to carry roofing materials such as roof rock and shingles. R&P has developed a shingle belt second to none.

Custom designed Belted flights are made specifically to handle Roofing Material at steep angles. Shingles, tile, bagged rock, and other Roofing Materials are transported quickly and safely to the rooftop.

Shingle Roofing Belt

16" wide 3 ply 225 1/16" X Bare (Special shingle belt) with 4" high cleats with backup support on 7' 6" centers.

All belts include 375 Flexco lace with nylon pin installed to desired length.

Shingle Roofing Belt designed for getting shingles high.

Belts are custom fabricated to meet your conveyors design requirements.

roofing-chevron designed for getting up your rocks off (the truck).

Beefy cleats with backup support for secure handling of packaged materials.

Strong carcass to eliminate cleat fold-back.

Cleat base is rounded to prevent tear-off.

Chevron cleats for loose rock.

2 or 3 ply American Made Belt

Any belt width or length.

Belts are available for all brands of roofing conveyors including:

Garlock / Clearfield / Morgen / Aeroil / Taurus / Rapat

Rubber & Plastics provides the most complete selection of conveyor belting, idlers and accessories.

Phone (503) 289-7720 Fax (503) 289-8920 Toll Free (800) 234-2358

[Conveyor Belt Index] [Belt Products] [Custom Cleating] [Chevron Belting]

Send mail to : sales@belting.cc with questions about roof or shingle belting.

Use of this site indicates acceptance of the RPI Disclaimer

Copyright © 2005 Revised 04/17/05 Belting Division, RPI